Don’t you hate it when you can’t hear your Vivint doorbell? Keep reading to discover how to fix the problem when your doorbell is too quiet or completely silent.
Vivint’s Doorbell Not Ringing
Is your Vivint doorbell not ringing inside your house? Here are the possible reasons:
- Sound settings: Check if you have reduced or muted the doorbell sound.
- Connection issues: Ensure your Vivint doorbell is properly connected to your SkyControl Panel.
- App troubles: A problem with the Vivint application may be disrupting the inner ringing of your device.
- Hardware damage: If your doorbell is broken or beyond repair, consider contacting a technician or replacing the entire unit.
How to Fix Vivint Doorbell Not Ringing Inside House?
Here is how to fix your Vivint doorbell not ringing inside the house:
1. Increase the Volume of Your Doorbell
Boost the volume of your doorbell to ensure you never miss a visitor. If the sound levels are too low, you may not hear the doorbell when someone is ringing.
Boost the sound of your Vivint doorbell in just a few simple steps:
- Access your SkyControl panel and locate the volume icon in the top right corner.
- Adjust the doorbell volume to your desired level.
- Don’t forget to log out of your SkyControl panel.
2. Reset Your SkyControl Panel
Boost the sound of your Vivint doorbell effortlessly! If you’re struggling with low sounds even after adjusting the volume, it might be due to connectivity issues between your doorbell and panel. Simply reboot the SkyControl panel to enhance the volume of your beloved doorbell.
Easily reset your SkyControl panel in just a few simple steps:
- Open your panel.
- Disarm the panel by clicking the Armed Stay button.
- Enter your PIN.
- Tap on the Devices button and select Display.
- Choose the panel that is linked to your doorbell device from the list.
- Restart your SkyControl panel by clicking on the Reboot button.
3. Rebooting Your Vivint Doorbell
Try rebooting your Vivint doorbell for a quick fix. This will restart all services and refresh the operating system, often resolving common issues.
Rebooting your Vivint doorbell is easy:
- Press and hold the button on your Vivint doorbell camera for 15 seconds.
- You’ll hear a chime when your finger touches the button, and the LED light will start changing colors.
- Keep holding the button until you see the yellow light appear for the second time.
- Release the button within 15 seconds of holding it. If you hold it for too long, the LED light may turn red and reset your doorbell.
4. Replace Your Battery
Is your Vivint doorbell losing power? Don’t worry, a simple battery replacement can solve the sound issue from your chime. Here’s how to easily replace the batteries:
- Approach your doorbell.
- Slide open the doorbell cover.
- Securely hold the battery pack to prevent any damage.
- Remove the old batteries and replace them with a fresh set of two AA batteries.
5. Change the Chime Sound
Don’t worry if you’ve picked a bad audio file for your chime. Vivint has you covered with a handy feature to customize your chime sound.
Here’s how to change the chime sound inside your home:
- Head to your SkyControl panel.
- Tap on Security and go to the Menu.
- Enter your 4-digit PIN and select Chime setup.
- Pick the specific sensor that should alert you to a visitor.
- Choose a chime sound from the menu.
How can you activate Vivint Doorbell notifications on your Android or iPhone device?
Have trouble with Vivint doorbell notifications on your Android or iOS device? No problem! Here’s a simple guide to activate them:
- Open your phone’s App settings.
- Scroll down to find the Vivint app.
- Tap on ‘notification’ in the menu.
- Make sure to toggle on all notifications to enable them.
- Double-check that the toggles are in green.
- Choose your preferred alert style.
